5–6 Stage RO/DI Water Filtration System with Booster Pump

Produce clean, highly purified water for your aquarium with our 5–6 stage RO/DI filtration systems, equipped with a booster pump for improved water pressure and filtration performance.

Depending on the model, filtration capacity ranges from approximately 27L to 102L per hour.

Multi-Stage Filtration

Our system uses multiple filtration stages to progressively remove impurities from your tap water:

1st Stage – Sediment Filter

Removes larger particles and sediments such as:

• Sand
• Dirt
• Rust
• Other suspended particles

2nd Stage – Carbon Filter

Helps remove:

• Chlorine
• Organic chemicals
• Unpleasant tastes and odours

3rd Stage – GAC Carbon Filter

Provides additional carbon filtration to further reduce:

• Chlorine
• Chemicals
• Unpleasant odours
• Colour and other organic impurities

4th / 5th Stage – Reverse Osmosis (RO) Membrane

The RO membrane is the main purification stage. It removes a wide range of dissolved impurities and contaminants from the water, significantly reducing:

• Dissolved salts and minerals
• Heavy metals
• Many microorganisms
• Chlorine and other contaminants that remain after pre-filtration
• Total Dissolved Solids (TDS)

5th / 6th Stage – DI (De-Ionisation) Filter

The DI resin further removes remaining dissolved ions and minerals from the RO water.

This produces very low-TDS or 0-TDS water, which is especially useful for aquarium applications where precise control over water parameters is important.

Available Models

*Unless otherwise stated.

UV Filtration

The 150G to 400G models use LED UV technology, while the 800G-UV/TDS uses a more powerful UV lamp.

The 800G system has a significantly higher flow rate, so it requires a higher-output UV lamp to provide effective UV treatment at that flow rate.

The LED UV systems used on the 150G–400G models are designed specifically for their respective flow rates and are capable of handling the water flow effectively.

TDS Performance

With proper installation, flushing and filter maintenance, the system is designed to produce water below 5 TDS.

With proper flushing and suitable source water conditions, 0 TDS can be achieved.

The UV/TDS models include an inline TDS meter, allowing you to monitor the TDS level:

• Before filtration – Check your incoming tap-water TDS
• After filtration – Check the TDS of your purified water

This makes it easy to monitor the performance of your RO/DI system and know when filter maintenance may be required.

What’s Included

Everything you need for a basic installation is included:

• 2 metres of white water tubing
• Filter wrench
• Tap attachment
• Plumbing tape

1-Year Warranty

All systems come with a 1-year warranty.

If a covered part fails or develops a leak during the warranty period, we provide a 1-to-1 replacement for the affected part, subject to our warranty terms.

Setup guide for compact unit – https://youtu.be/ZA1rHqF98TE

Setup guide for Adv/Pro unit – https://youtu.be/OnUtRBoH11U

Setup guide for 800G unit – https://youtu.be/KD1gJHxWVsA?si=OxUYKom7sJdOnssa